RX Only, Wireless HDMI Extender Receiver, Up to 1 TX to 4 RX Connections, Max Line-of-Sight Transmission Distance 1 TX to 1 RX (250m), 1 TX to 2 RX (230m), 1 TX to 3 RX (210m), 1 TX to 4 RX (190m)ClimatePartner certified

Connecting multiple Receivers is not very clear in the directions. There are two pamphlets that come with the RX, a larger black and white and a smaller white with color pictures. The white paper with color, has some directions that might seem odd, however, they WORK!! You need to have the receiver and transmitter next to each other (close enough to connect cables) and you connect the output video of the receiver to the input video of the transmitter. Then connect the loop out video of the transmitter to a monitor. You will get a QR type code that will show up on the (loop out) monitor. It is a verification of the TX and RX connected together properly on the IP address internally generated. Disconnect cables and reconnect to equipment normally. in my case, I connected to video source with TX and display monitor to RX's ( I have two) and I had video on both RX / Monitors at the same time. They are separated in range by 50 feet. I have strong signal to both receivers ( Indicated on the monitors when you first power them on and the RX displays a connectivity screen, the signal power is in the top right. The IP address in in the lower left. If there is no IP address, then that RX is NOT connected to the TX properly.

This was added to the system so I could have access to security cameras in all three bedrooms.Replaced a different product.This one worked with no problem.I purchased Oct 2023 for my security system.All three bedrooms and living room has my 16 cameras visible.No problems so far. They have been great.

Been using these for a few months for my weekly karaoke gig. No issues so far. I bought an extra receiver for a second screen. One minor issue are the USB cords for powering them. The cords are of a weird rubber and are difficult to wrap and store back in the boxes. But that certainly is a minor thing. Bottom line I'm happy with this system.

I purchased one transmitter and one receiver and a year later I added one more receiver I kept having a problem where it did not keep the signal when they lost power, however they have gone out of their way to help me to solve the problem and I am glad to say that I no longer have the problem. The images look great and they are very responsive I'm glad that I chose this company.

It works well once paired. But I still have issues when using 3 receivers at once. They are all farily close to one another well within the maximum distance. Works better than others out there. Audio is horrible and laggy though

Worked perfectly to connect two projectors to a video camera in a large conference room. My projectors were over 80 feet from the camera, and signal projected without any interference.

GARBAGE do not buy. Does not cover 10 feet.

It gets frozen after a few weeks of use and requires reboot (manually unplug and replug).